Technical Specifications - Seco Q7-C25 User Manual

Table of Contents

Advertisement

2.2 Technical Specifications

Processors
NXP i.MX 8M Family based on ARM Cortex®-A53 cores + general purpose
Cortex®-M4 processor:
-
i.MX 8M Quad - 4x Cortex®-A53 cores up to 1.5GHz
-
i.MX 8M Dual - 2x Cortex®-A53 cores up to 1.5GHz
-
i.MX 8M QuadLite - 4x Cortex®-A53 cores up to 1.5GHz, no VPU
Memory
Soldered Down DDR4-2400 memory, 32-bit interface, up to 4GB
Graphics
Integrated Graphics Processing Unit, supports 2 independent displays.
Embedded VPU (not available on QuadLite), supports H/W decoding of HEVC,
H.264, H.263, MPEG-4, MPEG-2, AVC, VC-1, RV, DivX, VP6, VP8, VP9, JPEG
Supports OpenGL ES 3.1, Open CL 1.2, OpenGL 2.X, Vulkan, DirectX, Open VG
1.1
Video Interfaces
1 x HDMI 2.0a / Display Port 1.3 interface, supporting HDCP 2.2 and HDCP 1.4
1 x LVDS 18/24-bit Dual Channel or 1 x eDP interface (factory alternatives)
Video Resolution
HDMI, resolution up to 4096x2160 @ 60Hz
MIPI-DSI, LVDS, resolution up to 1920x1080 @ 60Hz
Mass Storage
eMMC 5.0 Drive soldered on-board, up to 64GB
Optional microSD slot on board
8MB QuadSPI Flash soldered-onboard
PCI Express
Up to 2 x PCI-e x1 Gen2 ports
Networking
1 x Gigabit Ethernet interface
Optional WiFi + BT LE module onboard
USB
1 x USB 3.0 OTG Port
Up to 4 x USB 2.0 Host Ports
Audio
I2S Audio interface
Serial ports
1x UART Tx/Rx/RTS/CTS (Optional)
1x Debug UART
1x CAN Bus (TTL level)
Other Interfaces
I2C Bus
SM Bus
Optional SPI interface
8 x GPI/Os
UltraLow Power RTC
Power Management Signals
Watchdog
Power supply voltage: +5V
±5% and +5V
DC
RTC voltage: 3.3V
Operating temperature:
Commercial version 0°C ÷ +60°C **.
Industrial version -40°C ÷ +85°C **.
"
Dimensions: 70 x 70 mm (2.76
x 2.76
** Measured at any point of SECO standard heatspreader for this product,
during any and all times (including start-up). Actual temperature will widely
depend on application, enclosure and/or environment. Upon customer to
consider application-specific cooling solutions for the final system to keep the
heatspreader temperature in the range indicated.
Please also check paragraph 4.1
(optional)
SB
"
)

Advertisement

Table of Contents
loading

Table of Contents