Mechanical Specifications; Supported Operating Systems - Seco Smarc LEVY User Manual

Hide thumbs

Table of Contents

2.4 Mechanical Specifications

According to SMARC

specifications, the board dimensions are: 50 x 82 mm (1.97" x 3.23")

including the pin numbering and edge finger pattern.

Printed circuit of the board is made of ten layers, some of them are ground planes, for disturbance

rejection.

The MXM connector accommodates various connector heights for different carrier board

applications needs.

When using different connector heights, please consider that, according to SMARC

specifications, components placed on bottom side of the module will have a maximum height of

1.3mm. Keep this value in mind when choosing the MXM connector's height, if there is the need

to place components on the carrier board in the zone below the SMARC module.

2.5 Supported Operating Systems

LEVY module supports the following operating systems:

•

Linux

SECO will offer the BSP (Board Support Package) for these O.Ss, to reduce at minimum SW development of the board, supplying all the drivers and libraries needed

for use both with the SMARC board and the Carrier Board, assuming that the Carrier Board is designed following SECO SMARC Design Guide, with the same IC's.

For further details, please visit https://www.seco.com.

LEVY

Table of Contents