Inspur 3008 Series Configuration Manual page 74

f. Select Virtual Disk Management on the main screen and press <Enter>.
g. Select Manage Virtual Disk Properties and press <Enter> to enter the
Manage Virtual Disk Properties screen and check that the HS disk is
configured successfully.
Figure 3-110 Manage Virtual Disk Properties Screen
h. The configuration is completed.
2 Deleting HS Drives
Procedures:
Select Virtual Disk Management on the main screen and press <Enter>.
1.
Figure 3-111 Selecting Virtual Disk Management
Select Manage Virtual Disk Properties and press <Enter>.
2.
Figure 3-112 Selecting Manage Virtual Disk Properties
69