Inspur 3008 Series Configuration Manual page 41

Figure 3-38 Manage Hot Spares Screen
Press <->, <+>, or the space key in the Hot SPR column to mark the HS drive. If
7.
Hot Spr is marked as Yes, the disk has been configured as an HS drive; if No,
the disk has not been configured as an HS drive, as shown below.
Figure 3-39 Marking Hot Spares
Press <C> to enter the configuration confirmation screen, select Save changes
8.
then exit this menu, and press <Enter> to save the changes, as shown below.
36