Creating Raid Arrays - Inspur 3008 Series Configuration Manual

Figure 3-68 Setting Boot option filter to UEFI Only
Press <F10>. In the popup confirmation dialog box, select Yes and press <Enter>
4.
to save the settings and exit the BIOS configuration screen. The server restarts
and logs you on the LSI SAS3008 management screen.

3.2.2 Creating RAID Arrays

To create a RAID array, the disks in the same RAID array shall be of the same

type and specifications.
Inspur SAS3008IT cannot be configured to any RAID level.

1 Creating a RAID 0 Array in UEFI Mode
1. Re-enter the BIOS configuration screen, switch to the Advanced tab, select the
LSI SAS3008 controller from the existing RAID controller card list, and then
press <Enter>.
53