Table of Contents
Advertisement
Select View Existing Volume and press <Enter> to display the RAID array
9.
screen, and you can view the detailed information of the RAID array, as shown
below.
Figure 3-14 RAID Array Screen
10. RAID 0 array creation has been completed. Press <Esc> to exit.
2 Creating RAID 1
Scenario:
This section guides installation and debugging engineers on how to create RAID 1
arrays with Inspur SAS3008IR controller.
Procedures:
1.
During POST, press <Ctrl> and <C> to log in to the CU screen of Inspur
SAS3008IR, as shown below.
21
Hide quick links:
Advertisement
Table of Contents
