Inspur 3008 Series Configuration Manual page 68

4 Creating a RAID 10 Array in UEFI Mode
Re-enter the BIOS configuration screen, switch to the Advanced tab, select LSI
1.
SAS3008 controller from the existing RAID controller card list, and then press
<Enter>.
Figure 3-96 Selecting LSI SAS3008 Controller under Advanced Tab
On the popup screen, select LSI SAS3 MPT Controller Version 16.00.00.00 and
2.
press <Enter>.
Figure 3-97 Selecting LSI SAS3 MPT Controller Version 16.00.00.00
3. On the popup screen, select Controller Management and press <Enter>.
Figure 3-98 Selecting Controller Management
On the popup screen, select Create Configuration and press <Enter>.
4.
63