Table of Contents
Advertisement
Figure 3-72 Selecting Create Configuration
On the popup screen, select RAID 0 in Select RAID Level menu. Note: Select
5.
Select Physical Disks to select 2 disks and press <Enter> to create RAID 0.
Figure 3-73 Creating RAID 0
6.
On the popup screen, configure the following settings:
a. Select the disk type to be set in Select Interface Type. Note: SATA shall
be selected, as the disks for RAID array creation have SATA interfaces.
b. Set the disk status for RAID array creation to Enabled.
c. Select Apply Changes and press <Enter>.
Figure 3-74 Related Settings
55
Hide quick links:
Advertisement
Table of Contents
