Table of Contents
Advertisement
An HS disk must be a SATA or SAS disk with its capacity not smaller than the
maximum capacity of a disk in any RAID array.
RAID 1, RAID 1E and RAID 10 support HS disks, but RAID 0 does not.
Data preparation is not required for the following operation.
Procedures:
1.
Log in to the management screen.
2.
Enter the Virtual Disk Management screen.
a. Select Virtual Disk Management on the main screen and press <Enter>.
Figure 3-104 Selecting Virtual Disk Management
b. Select Manage Virtual Disk Properties and press <Enter> to enter the
screen for management of virtual disk properties.
66
Hide quick links:
Advertisement
Table of Contents
