Table of Contents
Advertisement
On the popup screen, select an appropriate option in Select RAID level menu.
5.
Note: Select Select Physical Disks to select 3 disks and press <Enter> to create
RAID 1E.
Figure 3-91 Selecting Select Physical Disks
6.
On the popup screen, configure as follows:
a. Select the disk type to be set in Select Interface Type. Note: SATA shall
be selected, as the disks for the RAID array creation have SATA
interfaces.
b. Set the disk status for RAID array creation to Enabled.
c. Select Apply Changes and press <Enter>.
Figure 3-92 Related Settings
7.
On the popup screen, set Confirm to Enabled, select Yes, and press <Enter>.
61
Hide quick links:
Advertisement
Table of Contents
