Figure 3-99 Selecting Create Configuration
On the popup screen, select appropriate settings in Select RAID Level menu.
5.
Note: Select Select Physical Disks to select 4 disks and press <Enter> to create
RAID 10.
Figure 3-100 Selecting Select Physical Disks
6.
On the popup screen, configure the following settings:
a. Select the disk type to be set in Select Interface Type. Note: SATA shall
be selected, as the disks for the RAID array creation have SATA
interfaces.
b. Set the disk status for RAID array creation to Enabled.
c. Select Apply Changes and press <Enter>.
On the popup screen, set Confirm to Enabled, select Yes, and press <Enter>.
7.
Figure 3-101 Setting Confirm to Enabled
64