Back; Accessories; Mounting The Stand - Sharp Plasmacluster FP-N40CX Operation Manual

PLASMACLUSTER INDICATOR LIGHT
Plasmacluster ion operation is selected using the remote
control.
Blue light
When the Plasmacluster ion operation is in Clean Mode,
or in AUTO Plasmacluster Ion Mode and the air in the
room is impure, the light will activate and the unit will
operate in Clean Mode.
Green light
When the Plasmacluster ion operation is in the Ion Con-
trol Mode, or in AUTO Plasmacluster Ion Mode and the
air in the room is clean, this light will activate and the
unit will operate in Ion Control Mode.
Light off
There are no Plasmacluster ions being generated.
• The light can be turned off by using the 'Display ON/
OFF Button' on the Remote Control.
(Please turn off the light when not required.)

BACK

ACCESSORIES

Remote Control
(1 unit)
Stand (1 unit)
Thumbscrews (2 pieces)
Located on bottom of stand
Handle
Air Outlet
Power Cord
Power Plug
Battery
(AA battery X 2 )
• Operation manual

MOUNTING THE STAND

Please mount the stand before use.
1
Remove the Front Panel.
• At this time, also remove the Pre-Fil-
ter, Washable Active Carbon Filter
and the True HEPA Filter.
2
Place the unit with its front
side facing down on a flat
and stable surface.
• Place a soft cloth, etc., to prevent
damaging the unit.
3
Insert the tabs on the stand
into the holes on the main
unit and fix the stand using
the included thumbscrews
(2 units).
• Do not insert the thumbscrews forci-
bly or diagonally. Otherwise, the
screws may not be tightened correctly.
Thumbscrews
E-9
1
Front Panel
2
1
T abs Holes