Editing Memory Contents - Casio WK-3200 User Manual

Song Memory Function

Editing Memory Contents

After you record to keyboard memory, you can recall
individual notes and parameter settings (such as tone
number) and make any changes you want. This means you
can correct misplayed notes, make changes in tone selections,
etc.
The following types of data can be edited.
• Note intensity
• Notes
• Chords
• Tone numbers
• Rhythm number
• INTRO/ENDING 1 button, INTRO/ENDING 2 button,
VARIATION/FILL-IN 1 button, VARIATION/FILL-IN 2
button, SYNCHRO/FILL-IN NEXT button operations
To edit memory contents
1
Press the SONG MEMORY button three times to
enter step recording standby, and then use the [+]
and [–] buttons to select a song number (0 to 4).
S t e
p
2
Use the SONG MEMORY TRACK buttons to select
the recorded track that you want to edit.
3
Press the [ ] CURSOR button to enter the editing
mode.
• The REC indicator disappears from the display, and
the STEP indicator flashes.
E-62
Flash
R e c
4
Use the [ ] and [ ] CURSOR buttons to move to
the location in track where the note or parameter
you want to change is located.
Note editing example
Velocity
N o t e C 4
5
Make any changes in the value that you want.
• The actual procedures you use to change a parameter
depend on the type of data it contains. See "Editing
Techniques and Display Contents" on page E-63 for
details.
6
Repeat steps 4 and 5 to edit other parameters.
7
Press the START/STOP button to end editing when
you are finished.
NOTE
• The only parameters that can be editted for Tracks 2
through 6 are notes and tone numbers.
• In the case of real-time recording, you later can change
tone numbers you specified while recording to Tracks 1
through 6 is in progress.
• You can only change tone numbers that were originally
set for Tracks 2 through 6 using step recording.
• In the case of real-time recording, you later can change
rhythm numbers you specified while recording to Track
1 is in progress.
• You can only change rhythm numbers that were originally
set for Track 1 using step recording.
• You cannot use the edit procedure to add more data to
a recording.
• You cannot move portions of a recording to a different
location within the recording.
• Note lengths cannot be changed.
Pitch
738A-E-064A