Saving Files; Loading A File - Casio WK-3200 User Manual

4
Use the [ ] and [ ] CURSOR buttons to display
the screen for the type of operation you want to
perform.
[ ]
[ ]
[ ]
[ ]
• See the pages referenced below for details about using
each of the above menu operations.
Loading a file (Crd Load):
Saving a file (Crd Save):
Renaming a file (Crd Rename):
Deleting a file (Crd Delete):
Formatting a SmartMedia card (Crd Format): page E-91
5
Press the [ ] CURSOR button to advance to the
next operation screen of each menu.
Basic Floppy Diskette Operation
(WK-3700 Only)
1
Insert a floppy diskette into the keyboard's floppy
disk drive.
2
Press the DISK/CARD button.
• This causes a pointer to appear next to the DISK/
CARD on the display, and also displays "Disk" in the
display's text area.
3
Perform the same operations as those starting from
step 3 of under "Basic SmartMedia Card Operation"
on page E-86.
• Note that Disk Mode operations are indicated on the
display by the prefix "Fd" in place of the "Crd" prefix
of the Card Mode operations.
738A-E-089A
L o a d
[ ]
S a v e
[ ]
R e n ame
[ ]
D e l e t e
[ ]
F o r ma t
page E-88
page E-87
page E-90
page E-90

Saving Files

You can use the procedures in this section to save Song
Memory, Synthesizer, and other data you create to external
storage media for later loading when you need it. See
"Savable File Types" on page E-82 for information about the
type of data you can save.
PREPARATION
• SmartMedia Card
• Insert the SmartMedia card that has been formatted
on the keyboard into the keyboard's card slot. Make
sure that the sticker is removed from the card's write
area, which enables writing.
• Floppy Diskette (WK-3700 Only)
• Insert a properly formatted floppy diskette into the
keyboard's floppy disk drive. Make sure that the
diskette's write protect hole is closed, which enables
writing.
NOTE
• Depending on the type and the amount of data involved,
a SmartMedia card or floppy diskette (WK-3700 only)
data save or load operation can take anywhere from a
few minutes to more than 10 minutes to complete. The
message "Pls Wait" will remain on the display to indicate
that a data save or load operation is being performed.
IMPORTANT!
• Never try to perform any operation while "Pls Wait" is
displayed. Performing any operation can cause Flash
memory or SmartMedia card or floppy diskette data to
be deleted, and damage the keyboard's memory and
cause it to malfunction.
To save a file to external storage media
1
What you should do first depends on the type of
external storage media you are using.
• SmartMedia Card:
On the WK-3700 press the DISK/CARD button twice.
On the WK-3200, press the CARD button once.
• This causes a pointer to appear next to the DISK/
CARD or CARD on the display, and also displays
"Card" in the display's text area.
• Floppy Diskette (WK-3700 Only):
Press the DISK/CARD button.
• This causes a pointer to appear next to the DISK/
CARD on the display, and also displays "Disk" in
the display's text area.
NOTE
• After pressing the DISK/CARD button (WK-3200: CARD
button) once, you can use the [ ] and [ ] CURSOR
buttons to select the external storage media.
Saving Data
E-87