Casio WK-3200 User Manual page 63

To correct mistakes while step
recording
1
Without exiting step recording, use the [ ]
CURSOR button to move the input point to the left.
• The REC indicator disappears from the display, and
the STEP indicator flashes.
N o t e C # 4
Measure 126/Beat 3/Clock 48
(Normal input point)
Data flow
• • • • • • • • • • • • • •
C 4
Press [ ] CURSOR button.
2
Monitoring the data on the display, use [ ] and
[ ] CURSOR buttons to move the input point to
the data you want to change.
Example: To re-record all note data following the note
A3 located at Measure 120, Beat 1, Clock 0.
N o t e A 3
Measure 120/Beat 1/Clock 0
(Input point moved to using [ ] and [ ]
Data flow
• • • • • • •
3
Press the [ ] CURSOR button.
R e w r i t e ?
738A-E-063A
Measure 126/Beat 3/Clock 0
(Previous data)
Data flow
• • • • • • • • • • • • • •
C 4
Use [ ] and [ ] CURSOR
to move left and right.
CURSOR buttons )
• • • • • • •
A3 C 4
Song Memory Function
4
Press the YES button.
• This deletes all data from the location you specified
and enters step record standby.
• Pressing the [ ] CURSOR button or the NO button
cancels deleting the data.
Measure 120/Beat 1/Clock 0
( Step re-recording begins from here. )
Data flow
• • • • • • •
NOTE
• When you reach the end of the recording by pressing
the [ ] CURSOR button, the "REC" indicator appears
and the "STEP" indicator flashes on the display,
indicating that you can add more data using step
recording.
To delete specific note data
1
Perform steps 1 and 2 under "To correct mistakes
while step recording" above to display the note you
want to delete.
2
Press the [ ] CURSOR button twice.
3
In response to the "Delete?" message that appears
on the screen, press the YES button to delete the
displayed note.
All data to
the right
is deleted.
E-61