Editing Memory Contents - Casio WK-3000 User Manual

Song Memory Function
SONG MEMORY
4
Press the YES button.
• This deletes all data from the location you specified
and enters step record standby.
• Pressing the [ ] CURSOR button or the NO button
cancels deleting the data.
Measure 120/Beat 1/Clock 0
( Step re-recording begins from here. )
Data flow
• • • • • • •
NOTE
• When you reach the end of the recording by pressing
the [ ] CURSOR button, the "REC" indicator appears
and the "STEP" indicator flashes on the display,
indicating that you can add more data using step
recording.
To delete specific note data
1
Perform steps 1 and 2 under "To correct mistakes
while step recording" above to display the note you
want to delete.
2
Press the [ ] CURSOR button twice.
3
In response to the "Delete?" message that appears
on the screen, press the YES button to delete the
displayed note.
E-70
WK3100_e_61-73.p65
START/STOP
All data to
the right
is deleted.
70
CURSOR
SONG MEMORY TRACK

Editing Memory Contents

After you record to keyboard memory, you can recall
individual notes and parameter settings (such as tone
number) and make any changes you want. This means you
can correct misplayed notes, make changes in tone selections,
etc.
The following types of data can be edited.
• Note intensity
• Notes
• Chords
• Tone numbers
• Rhythm number
• INTRO/ENDING 1 button, INTRO/ENDING 2 button,
VARIATION/FILL-IN 1 button, VARIATION/FILL-IN 2
button, SYNCHRO/FILL-IN NEXT button operations
To edit memory contents
1
Press the SONG MEMORY button three times to
enter step recording standby, and then use the [+]
and [–] buttons to select a song number (0 to 4).
S t e R e c
p
2
Use the SONG MEMORY TRACK buttons to select
the recorded track that you want to edit.
3
Press the [ ] CURSOR button to enter the editing
mode.
• The REC indicator disappears from the display, and
the STEP indicator flashes.
04.3.26, 0:11 PM
[+] / [–]
YES/NO
Flash
735A-E-072A