Formatting External Storage Media - Casio WK-3200 User Manual

PREPARATION
• SmartMedia Card
• Insert the SmartMedia card that contains the file you
want to delete into the keyboard's card slot. Make sure
that the sticker is removed from the card's write area,
which enables writing.
• Floppy Diskette (WK-3700 Only)
• Insert the floppy diskette that contains the file you want
to delete into the keyboard's floppy disk drive. Make
sure that the diskette's write protect hole is closed,
which enables writing.
To delete a file from external storage media
1
What you should do first depends on the type of
external storage media you are using.
• SmartMedia Card
On the WK-3700 press the DISK/CARD button twice.
On the WK-3200, press the CARD button once.
• This causes a pointer to appear next to the DISK/
CARD or CARD on the display, and also displays
"Card" in the display's text area.
• Floppy Diskette (WK-3700 Only)
Press the DISK/CARD button.
• This causes a pointer to appear next to the DISK/
CARD on the display, and also displays "Disk" in
the display's text area.
NOTE
• After pressing the DISK/CARD button (WK-3200: CARD
button) once, you can use the [ ] and [ ] CURSOR
buttons to select the external storage media.
2
Press the [ ] CURSOR button to display the Card
Mode (or Disk Mode) menu.
3
Use the [ ] and [ ] CURSOR buttons to display
the "Delete" screen.
4
Press the [ ] CURSOR button to advance to the
file type selection screen.
5
Use the [ ] and [ ] CURSOR buttons to select the
type of the file you want to delete.
6
Press the [ ] CURSOR button to display the file
name selection screen.
738A-E-093A
7
Use the [ ] and [ ] CURSOR buttons or [+] and
[–] buttons to select the name of the file you want
to delete.
• You could also use the number buttons to input a
three-digit file number. The file number is shown in
the number area of the display.
8
After selecting the file, press the [ ] CURSOR
button.
• This will display a confirmation message asking
whether you really want to delete the file.
9
Press the YES button to delete the file.
• This will cause the message "Pls Wait" to appear on
the display to indicate that a card access operation is
being performed. Never try to perform any other
operation on the keyboard while the card is being
accessed. The message "Complete" will appear on the
display after file deletion is complete. After a few
seconds, the message will be replaced by the file name
selection screen.
• If you do not want to continue with file deletion, press
the EXIT button or the NO button in response to the
above confirmation message. This will return you to
the file name selection screen.
0
After you are finished performing the delete
operation, press the DISK/CARD button (CARD
button on the WK-3200) to exit the Card Mode.

Formatting External Storage Media

Use the procedures in this section to format external storage
media before using it for the first time, or when you want to
delete all of the contents on a SmartMedia card or floppy
diskette.
IMPORTANT!
• Note that formatting a card or diskette that already
contains data causes all of that data to be deleted. Data
deleted by the format operation cannot be recovered.
Before performing the procedure below, check to make
sure that the media does not contain any data you might
need.
PREPARATION
• SmartMedia Card
• Insert the SmartMedia card you want to format into
the keyboard's card slot. Make sure that the sticker is
removed from the card's write area, which enables
writing.
• Floppy Diskette (WK-3700 Only)
• Insert the floppy diskette you want to format into the
keyboard's floppy disk drive. Make sure that the
diskette's write protect hole is closed, which enables
writing.
Saving Data
E-91