Creating A User Tone - Casio WK-3200 User Manual

GWK-3200
MODULATION button lamp

Creating a User Tone

Use the following procedure to select a preset tone and change
its parameters to create a user tone.
1
First, select the preset tone you want to use as a
basis for your user tone.
2
Press the SYNTH button.
• This enters the Synthesizer Mode, which is indicated
by the pointer next to SYNTH on the display screen.
Parameter setting value
Currently selected parameter
A t k T i me
3
Use [ ] and [ ] CURSOR buttons to display the
parameter whose setting you want to change.
V i b D e l a
• Each press of [ ] or [ ] CURSOR button changes to
the next parameter. See "Parameters and Their
Settings" on this page for information on setting range
for each parameter.
4
Use [+] and [–] to change the setting of the currently
selected parameter.
• You can also use the number buttons to input a value
to change a parameter setting. See "Parameters and
Their Settings" on this page for information on setting
range for each parameter.
5
After you are finished editing the sound, press the
SYNTH button to exit the Synthesizer Mode.
NOTE
• See "Storing a User Tone In Memory" on page E-50 for
details on saving user tone data to memory so it is not
deleted.
738A-E-049A
SYNTH
The following describes the function of each parameter and
provides its setting range.
I Attack Time (Range: –64 to 00 to +63)
Time it takes before the tone sounds after a key is pressed
I Release Time (Range: –64 to 00 to +63)
Time the tone continues to sound after a key is released
I Cutoff Frequency
High-band cutoff for the harmonic components of the tone
y
I Resonance (Range: –64 to 00 to +63)
Resonance of the tone
Synthesizer Mode
Parameters and Their Settings
A t k T i me
R e l . T i me
(Range: –64 to 00 to +63)
C - o f f F r
R e s o n a n
CURSOR
[+] / [–]
q
.
E-47