Connections - Casio WK-3200 User Manual

Connections

• WK-3700
Phones and Line Out Terminals
Before connecting phones or other external equipment, be
sure to first turn down the volume settings of the keyboard
and the connected equipment. You can then adjust volume
to the desired level after connections are complete.
[Front]
PHONES Terminal
Stereo standard plug
Connecting Phones 1
Connecting phones cuts off output from the keyboard's built-
in speakers, so you can play even late at night without
disturbing anyone.
[Rear Panel]
Audio amplifier AUX IN, etc.
LEFT
(White)
RIGHT
(Red)
OUT
Guitar amplifier,
keyboard amplifier, etc.
INPUT 1
INPUT 2
Connecting to Audio Equipment 2
Use commercially available cords to connect to the two jacks
as shown in Figure 2 . It is up to you to purchase connecting
cables like the ones shown in the illustration for connection.
Normally in this configuration, you must set the audio
equipment's input selector to the setting that specifies the
terminal (such as AUX IN) that the keyboard is connected to.
Use the keyboard's MAIN VOLUME knob to adjust the
volume level.
738A-E-019A
1
PIN plug
MIDI
SUSTAIN/ R L/MONO
ASSIGNABLE JACK LINE OUT DC 12V
IN
Standard jacks
Standard plugs
Connecting to a Musical Instrument Amplifier 3
Use commercially available cords to connect to the two jacks
as shown in Figure 3 . It is up to you to purchase connecting
cables like the ones shown in the illustration for connection.
Use the keyboard's MAIN VOLUME knob to adjust the
volume level.
• If your amplifier has only one input jack, connect a cord to
the L/MONO jack only.
NOTE
• You can also connect the keyboard's MIDI terminal to a
computer or sequencer. See "MIDI" on page E-79 for
details.
• WK-3200
Phones/Output Terminal
Before connecting phones or other external equipment, be
sure to first turn down the volume settings of the keyboard
and the connected equipment. You can then adjust volume
to the desired level after connections are complete.
[Front]
PHONES/OUTPUT Terminal
3
Keyboard amp,
guitar amp, etc.
Connecting Phones 1
Connecting phones cuts off output from the keyboard's built-
in speakers, so you can play even late at night without
disturbing anyone.
Audio Equipment 2
Connect the keyboard to a audio equipment using a
commercially available connecting cord with a standard plug
on one end and two PIN plugs on the other end. Note that
the standard plug you connect to the keyboard must be a
stereo plug, otherwise you will be able to output only one of
stereo channels. In this configuration, you normally set the
input selector of the audio equipment to the terminal (usually
marked AUX IN or something similar) where the cord from
the keyboard is connected. See the user documentation that
comes with your audio equipment for full details.
Audio connection
1
Stereo standard
plug
PIN plug
White Red
2
LEFT RIGHT
AUX IN or similar terminal
of audio amplifier
E-17