Download Print this page

OLT SSGS812-FJ-Ply Assembly Manual page 31

8x12 sunshed greenhouse building fj bevel model with plywood roof

Advertisement

87" Rear Wall
Narrow Trim
72.
Attach remaining Narrow Wall Trims where wall panels come together and leave a seam.
Note: the Narrow Trim is 79" long on the Short Wall Side, 88" long on the Tall Wall Side, and 87" on
the Rear Wall. Align Side Trims tight underneath Soffit and Rafter. Attach with 8 - 1 1/2" finishing nails
per piece. Align and attach Rear Trim as per Door Trims in Step 76.
73.
Attach Door Hinges to Top and Bottom Dutch Door sections. Top Door has trim overhanging
door at bottom while bottom door has trim recessed slightly. Hinges should be centered on door trim
with barrel nudged to end of trim. Use 2" & 3/4" black headed screws as shown above.
Bottom Door
2" Black
Bottom Skirting
Screws
74.
Place Bottom Dutch Door panel into position.
Gap 3/8" on bottom, evenly space on sides, and
attach hinge to doorway seam trim with 2" black
headed screws. Use included shim shingle to help
keep the door evenly spaced on bottom.
Toll Free 1-888-658-1658
3/8" gap at bottom.
Evenly spaced on
sides.
www.outdoorlivingtoday.com
2" Screws
3/4" screw
Top and Bottom
Hinges centered
on door trim.
Slight gap.Top Trim over-
laps bottom trim to prevent
water from getting in.
75.
Place the Top Dutch Door Panel into place
and gap top and bottom trims on the outside
about 1/8" apart. On the inside, horizontal door
frames should be about 1/4" apart. Use a shim
once again to help you. Attach hinges to trim
with 2" black headed screws provided.
Page 31
Middle Hinges
centered on trims.
Bottom Door Trim
sales@outdoorlivingtoday.com
1/4" gap on
inside.

Advertisement

loading