Advertisement
62.
Attach center panel as per Step 58. Position remaining Short Outside Roof Panel and attach
as per Steps 56-57.
63.
Installation of 6 Polygal Panels is next.
Start by removing protective plastic layer on
each panel. Exterior/interior side of protective
polygal film is printed on film, be sure to note
the side and install accordingly. Slide panel
up between rafters so it rests on Polygal
Support Cleats. From the inside, carefully
slide end of panel underneath plywood.
65.
Use 3 - 3/4" screws to secure Polygal
Panel to underside of roof plywood.
Toll Free 1-888-658-1658
64.
Position Polygal Panel with equal gaps between
rafters and overhanging the end of rafters by 1". With
6 - 1" screws, secure panel to Polygal Support Cleats.
66.
Complete installation of remaining Polygal
Panels as per Steps 63 - 65.With a Caulking Gun,
apply Silicon down each side of rafter to seal gaps
between rafters and Polygal Panels.
www.outdoorlivingtoday.com
Page 27
Completed Polygal Side Roof Panels
equal gaps
on each side
of rafter.
sales@outdoorlivingtoday.com
Advertisement
