Advertisement
Top Plates should be flush
with inside of wall framing.
34.
When properly positioned, attach by screwing down into top wall framing with 4 - 2" screws.
35.
Next, attach the Side Top Plates (1 1/2" x 2 1/2" x 65 3/4" - 33 3/4 degree cut down edge) to
high wall side. Once again, position top plate so it is flush with inside of wall plate. Side plate should
also be flush with Rear Top Plate. Secure with 4 - 2 1/2" screws per piece. Complete Short Side Top
Plates (3/4" x 2 1/2" x 65 3/4" - 22 1/2 degree cut down edge).
36.
Position remaining Front Top
Plate on wall framing and secure with
4 - 2" screws.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 18
22 1/2 degree angle
cut
end
follows
angle of wall.
sales@outdoorlivingtoday.com
Front Top Plate
Advertisement
