Product Functions; Position Tracking; Alerts - MeiTrack TC68L User Manual

MEITRACK TC68L/TC68SL Plug-and-Play Vehicle GPS Tracker User Guide
GPS sensitivity
Positioning accuracy
I/O port
WiFi function
(optional)

3.3 Product Functions

3.3.1 Position Tracking

Function
Real-time tracking
Tracking by time
interval
Tracking by distance
Cornering report

3.3.2 Alerts

Function
External power supply
cut-off alert
Speeding
Geo-fence
SOS alert
Low battery alert for the
external power supply
Device status alert
Harsh
acceleration/braking alert
Copyright © 2021 Meitrack Group All rights reserved.
-161 dB
2.5 meters
1 USB port
2.4 GHz WiFi hotspot
Description
After sending a command, you can query the current device location from the
platform or your mobile phone.
After you set the time interval, the device will report its location information to the
platform or mobile phone at the preset time interval.
After you set the distance, the device will report its location information to the
platform based on the preset distance.
Set the cornering angle. When the driving angle is greater than the preset value, the
device will report its location information. This report is used to make the driving
route smoother when no data is sent at the preset time interval or distance interval
while the vehicle corners.
Description
When the device is removed from the OBD connector, an alert will be reported to
the platform or be notified to the user.
You can set the maximum speed threshold by using the platform, Meitrack
Manager software or SMS. When the driving speed exceeds the preset value, an
alert will be sent.
With a coordinate and radius, you can set a circular geo-fence.
When the vehicle enters or exits the preset geo-fence, an alert will be reported
to the platform or be notified to the user by SMS. A maximum of eight circular
geo-fences can be set.
When the SOS button is pressed, an alert will be sent.
When the voltage of the external power supply is lower than 11.4 V, an alert will
be sent.
When the device is powered on or powered off, a device status alert will be sent.
When the internal battery power is low, a low battery alert will be sent.
When the driving speed exceeds the preset harsh acceleration/braking threshold,
an alert will be sent. The TC68L supports this function because it can obtain OBD
data. However, the TC68SL does not support this function.
TDD：B41
- 6 -