Beschreibung Der optische Rückumsetzer OPM-CDL von Polytron wandelt ein optisches Signal zurück in HF-Signale. Unterstützt werden: UKW, DAB, DVB-T (= TERR.) und 2 Polaritäten (LHC und RHC). Der OPM-CDL ist ein Dual-Umsetzer, der an einen Multischalter angeschlossen werden kann. Diese Anleitung setzt voraus, dass:...
Fällen verwendet werden, in denen die Satelliten nicht vollständig belegt sind und eine zusätzliche Dämpfung erforderlich ist. Fernspeisung Der Rückumsetzer wird über das optionale Netzteil OPM-CPS (Polytron-Art.: 9245532) betrieben. Alternativ lässt sich der Rückumsetzer OPM-CDL über angeschlossene Multischalter fernspeisen. Bitte die spezifische Stromaufnahme beachten (siehe Datenblatt).
Page 6
RF signals. Supported are: FM, DAB, DVB-T (= TERR.) and 2 polarities (LHC und RHC). The OPM-CDL is a Dual converter, which can be connected to a multi-switch. This guide assumes that: the converter is connected to a suitable passive optical network (PON), providing a minimum optical signal level of -12 dBm at the connection point of the converter.
Remote power supply The reverse converter is operated via the optional power supply OPM-CPS (Polytron-No.: 9245532). Alternatively, the OPM-CDL return converter can be operated via connected multiswitches. Please observe the specific current consumption (see data sheet).
Need help?
Do you have a question about the OPM-CDL and is the answer not in the manual?
Questions and answers