Preparation; Name Of Each Part Of Projector - Sanyo PLC-XT10 Owner's Manual

PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT
INFRARED
REMOTE RECEIVER
PROJECTION LENS
LENS COVER
BACK
EXHAUST VENTS
HOT AIR EXHAUSTED !
Air blown from Exhaust Vents is hot.
When using or installing projector,
following precautions should be taken.
Do not put any flammable object near
this vent.
Keep side grill at least 3'(1m) away from
any object, especially heat-sensitive
object.
Do not touch this area, especially screw
and metallic part. This area will become
hot while a projector is used.
This projector
temperature and automatically controls
operating power of Cooling Fans.
BOTTOM
AIR INTAKE VENTS
This projector is equipped with Cooling
Fans for protection from overheating.
Pay attention to the following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
Do not cover vent slots.
Keep side and bottom clear of any
object. Obstructions may block
cooling air.
TOP CONTROLS
AND INDICATORS
TERMINALS
AND CONNECTORS
detects internal
LAMP COVER
SPEAKERS
AIR INTAKE VENT
INFRARED
REMOTE RECEIVER
POWER CORD CONNECTOR
AIR FILTERS
AIR INTAKE VENT
CARRY HANDLE
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
7