Top Controls And Indicators - Sanyo PLC-XT10 Owner's Manual

BEFORE OPERATION
This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.
TOP CONTROLS
AND INDICATORS
LAMP REPLACE INDICATOR
Turns yellow when the
life of the projection
lamp draws to an end.
(P38)
POINT (VOLUME + / – ) BUTTONS
Used to select an item or adjust
value in ON-SCREEN MENU.
They are also used to pan the
image in DIGITAL ZOOM
mode. (P30)
POINT LEFT/RIGHT buttons are
also used as VOLUME +/–
buttons. (P21)
INPUT BUTTON
Used to select input
source. (P22, 31)
IMAGE BUTTON
Used to select image
level. (P28, 33)
ZOOM BUTTON
Used to adjust zoom.
(P20)
FOCUS BUTTON
Used to adjust focus.
(P20)
16

TOP CONTROLS AND INDICATORS

WARNING TEMP. INDICATOR
Flashes red when
internal projector
temperature is too
high. (P41)
+/–
READY INDICATOR
Lights green when the
projector is ready to be turned
on. And it flashes green in
Power Management mode.
(P37)
ON-OFF
SELECT
KEYSTONE
LAMP INDICATOR
Becomes dim when the
projector is turned on.
And it is bright when
the projector is in
stand-by mode.
POWER ON–OFF BUTTON
Used to turn the projector
on or off. (P19)
SELECT BUTTON
Used to execute the item
selected. It is also used
to expand / compress
the image in DIGITAL
ZOOM mode. (P30)
MENU BUTTON
Used to open or close
MENU operation. (P17,
18)
AUTO PC ADJ. BUTTON
Use to operate AUTO PC
Adjustment function. (P25)
KEYSTONE BUTTON
Used to correct keystone
distortion. (P20, 36)
LENS SHIFT BUTTON
Used to select LENS
SHIFT function. (P20)