Remote Control Batteries Installation - Sanyo PLC-XT10 Owner's Manual

D.ZOOM BUTTON
Used to select DIGITAL
ZOOM +/– mode and
resize image. (P30)
SELECT BUTTON
Used to execute item
selected, or to expand or
compress image in
DIGITAL ZOOM +/- mode.
(P30)
MENU BUTTON
Used to select MENU
operation. (P17, 18)
P-TIMER BUTTON
Used to operate P-
TIMER function. (P21)
ZOOM BUTTON
Used to adjust zoom. (P20)
Remove battery
1
compartment lid.
Press lid down-
ward and slide it.
To insure safe operation, please observe following precautions :
Use (2) AA, UM3 or R06 type alkaline batteries.
Replace two batteries at same time.
Do not use a new battery with an used battery.
Avoid contact with water or liquid.
Do not expose Remote Control Unit to moisture, or heat.
Do not drop Remote Control Unit.
If a battery has leaked on Remote Control Unit, carefully wipe case clean and install new batteries.
Danger of explosion if battery is incorrectly replaced.
Dispose of used batteries according to batteries manufacturers instructions and local rules.
NO SHOW BUTTON
Used to turn picture into
black image. (P21)
AUTO PC ON-OFF
D.ZOOM FREEZE NO SHOW
MUTE IMAGE FREEZE BUTTON
Used to freeze picture. (P21)
VOLUME- VOLUME+
SELECT
POINT (VOLUME +/-)
MENU KEYSTONE
Used to select an item or
adjust value in ON-SCREEN
MENU. They are also used
to pan image in DIGITAL
ZOOM +/- mode. (P30)
POINT LEFT/RIGHT buttons
are also used as VOLUME
+/- buttons. (P21)
LASER
COMPUTER 1 BUTTON
Used to select input
P-TIMER
COMPUTER 1 COMPUTER 1
source (COMPUTER 1).
(P22)
ZOOM
COMPUTER 2 COMPUTER 2
COMPUTER 2 BUTTON
VIDEO
Used to select input
source (COMPUTER 2).
FOCUS LENS
(P22, 31)
VIDEO BUTTON
Used to select input
source (VIDEO). (P31)

Remote Control Batteries Installation

Slide batteries into
2
compartment.
Operating Range
Point Remote Control Unit toward
projector
whenever pressing any button.
Maximum operating range for
Remote Control Unit is about 16.4'
(5m) and 60° in front and rear of a
projector.
BUTTONS
16.4'
(5 m)
16.4'
(5 m)
3
Two AA size batteries
For correct polarity (+ and
–), be sure battery
terminals are in contact
with pins in compartment.
BEFORE OPERATION
(Receiver Window)
60°
60°
Replace compartment lid.
15