Operating Wireless Mouse - Sanyo PLC-XT10 Owner's Manual

APPENDIX
Wireless Remote Control Unit is not only able to operate this projector but also usable as a wireless mouse for most
Personal Computers. POINT button, drag ON/OFF button and two CLICK buttons are used for wireless mouse operation.
This Wireless Mouse function is available only when PC mouse pointer is displayed on a projected screen. When ON-
SCREEN MENU or any message / dialog box is displayed on the screen instead of PC mouse pointer, this Wireless Mouse
function cannot be used.
To use Wireless Remote Control Unit as Wireless Mouse for a Personal Computer, installation of the mouse driver (not
supplied) is required. Make sure that the mouse driver is properly installed in your computer. And make sure that the mouse
port (or USB port) of a Personal Computer is activated.
Connect the mouse port (or USB port) of your computer to
1
Control Port (or USB connector) of this projector with Control
Cable (or USB cable). (Refer to page 11, 12 for connection.)
2 Turn the projector on first, and then turn on your computer.
When the computer is switched on first, Wireless Mouse may not
work properly.
When controlling a PC mouse pointer, operate Wireless Mouse with POINT button, Drag ON/OFF button, LEFT CLICK
button and RIGHT CLICK button on Wireless Remote Control Unit.
POINT button
Used to move PC mouse pointer.
corresponding with the direction you are pressing.
LEFT CLICK button
This button has the same function as the left button in a PC mouse.
Press this button and the POINT button to drag a selected screen
object.
RIGHT CLICK button
This button has the same function as the right button in a PC mouse.
DRAG ON/OFF button
Use this button and the POINT button to drag a selected screen
object. Press and release the Drag ON/OFF button, DRAG ON
INDICATOR lights green and the remote control is in Drag mode.
Use the POINT button in the direction that you want to drag the
screen object. Press and release the Drag ON/OFF button again or
press any other button, to drop the object at the new screen location.
40

OPERATING WIRELESS MOUSE

INSTALLATION
OPERATING WIRELESS MOUSE
The pointer is moved
Note : When your computer has no mouse
port, connect Serial Port of your
computer to Control Port of the
projector with Control Cable for Serial
Port (supplied).
AUTO PC ON-OFF
DRAG ON
D.ZOOM FREEZE
INDICATOR
MUTE
VOLUME-
MENU
DRAG ON/OFF
button
POINT button
(Move the pointer)
LASER
LEFT CLICK button
RIGHT CLICK button
(left button of the mouse) (right button of the mouse)
P-TIMER
ZOOM
FOCUS LENS
NO SHOW
IMAGE
VOLUME+
SELECT
KEYSTONE
COMPUTER 1
COMPUTER 2
VIDEO