Flycam FLCM-QR Assembly Manual

Quick release adapter plate

Download this manual

Quick Release Adapter Plate

(FLCM-QR)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Ratchet

Tightening Knob

Pin for HD Cameras

3/8" -16 Mounting Bolt

1/4" - 20 Mounting Bolt

Plate Release Pin

Quick Release Adapter

Quick Release Plate

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Page 1 Quick Release Adapter Plate (FLCM-QR) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Setup Quick Release Adapter Plate Loosen the ratchet knob of quick release  adaptor and remove the quick release plate by sliding it. Attach the fluid head plate (Not Included)  to the bottom side of quick release adapter then tighten the screw with the help of screw Note: You can mount it on Tripod, Rail System, Sliders etc.
Page 3 YOUR FLYCAM QUICK RELEASE ADAPTER PLATE ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.