Video Input; Input Source Selection (Video, S-Video, Component) - Sanyo PJLINK PLC-XL51 Owner's Manual

Video Input

Input Source Selection (Video, S-Video, Component)

Direct Operation
Press the INPUT button on the top control to select Video,
or press the VIDEO button on the remote control to select
Video, the S-VIDEO button on the remote control to select
S-video, or the COMPONENT button on the remote control
to select Component.
Before using the INPUT or VIDEO / S-VIDEO / COMPONENT
buttons, select the correct input source through menu
operation as described below.
Menu Operation
1
Use the MENU button to display the On-Screen Menu.
Press the Point
pointer to the Input Menu icon.
2
Use the Point
ed
pointer to Video and then press the SELECT button to
display the Source Select Menu .
3
Move the pointer to the desired source and then press
the SELECT button.
When selecting "Auto, " the projector
Auto
automatically detects the incoming video
signal, and adjusts itself to optimize
its performance. The projector selects
connection in the following order:
1. Component
2. S-video
3. Video
When the video input signal is connected
Video
to the VIDEO jack, select Video.
When the video input signal is connected
S-video
to the S-VIDEO jack, select S-video.
When the input source is coming
Component
from video equipment connected to
the COMPONENT IN terminal with a
Component Cable (not supplied), select
Component.
✔Note:
•Computer 2 is not displayed when the COMPUTER IN 2/
MONITOR OUT terminal is set as Monitor out (p.49).
• Wired and Wireless are for the Network function. See
owner's manual "Network Set-up and Operation" .
buttons to move the red frame
7 8
buttons to move the red arrow
Top Control
INPUT button
Remote Control
VIDEO button
S-VIDEO button
COMPONENT button
Input Menu icon
Input Menu
Move the pointer to Video
and press the SELECT button.
VIDEO
Source Select Menu (VIDEO)
Move the pointer to the
desired source and press
the SELECT button.
INPUT button
Computer 1
Computer 2*
Video
Wired
Wireless
37