Side Terminal - Sanyo PJLINK PLC-XL51 Owner's Manual

Part Names and Functions

Side Terminal

q
y
u
i
q
LAN Connection Terminal
Connect the LAN cable (refer to the owner's manual
"Network Set-up and Operation").
w SERVICE PORT
This jack is used to service the projector.
e
COMPUTER IN 1
Connect output signal from a computer, or RGB scart 21-
pin video output to this terminal (pp.16, 18).
When the cable is of the longer variety, it is advisable to
use this terminal and not COMPUTER IN 2/MONITOR
OUT.
r COMPUTER IN 2/MONITOR OUT
This terminal is switchable and can be used for input
from a computer or output to the other monitor.
Set the terminal up as either Computer input or Monitor
output properly. [Used for Monitor out, this terminal
outputs only incoming signal from COMPUTER IN 1
terminal (pp. 16, 49)].
t COMPONENT IN
Connect the component video output signal to these
jacks (p.18).
y WIRELESS INDICATOR
Display the status of wireless network. Refer to the
owner's manual "Network Set-up and Operation" .
u SD MEMORy CARD INDICATOR
Display the status of SD memory card. When inserting
SD memory card, the indicator lights, and when
removing SD memory card, the indicator turns off.
10
w
e
o
!0
i
o
!0
!1
!2
!3
!4
r t
!1 !2 !3
SD MEMORy CARD SLOT
Insert the SD memory card (not supplied) for Memory
viewer operation (refer to the owner's manual of
Memory Viewer function).
ALARM buttons
Use these buttons when setting up the Alarm
function (pp.56-57).
S-VIDEO IN
Connect the S-VIDEO output from video equipment to
this jack (p.17).
AUDIO OUT(VARIABLE)
Connect an external audio amplifier to this jack (pp.16-
18).
This terminal outputs sound from AUDIO IN terminal (!2
or !4 ) .
AUDIO IN COMPUTER
Connect the audio output (stereo) from a computer
connected to e or r to this jack (pp.16, 18).
VIDEO IN
Connect the composite video output from video
equipment to VIDEO jack (p.17).
AUDIO IN
Connect the audio output from video equipment
connected to t, !0 or !3 to this jack. [When the audio
output is monaural, connect it to L (MONO) jack (pp.17-
18).
!4