Image Level Adjustment - Sanyo PJLINK PLC-XL51 Owner's Manual

Video Input

Image Level Adjustment

1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Image Adjust Menu icon.
2
Use the Point
pointer to the desired item and then press the SELECT
button. The level of each item is displayed. Adjust each
level by pressing the Point
Contrast
Press the Point 7 button to decrease the contrast; press the
Point 8 button to increase the contrast (from 0 to 63).
Brightness
Press the Point button to decrease the brightness; press
7
the Point button to increase the brightness (from 0 to 63).
8
Color
Press the Point button to decrease the intensity of the
7
color; press the Point
the color (from 0 to 63).
Tint
Use the Point buttons to adjust the tint value to get a
7 8
proper color balance (from 0 to 63).
Color temp.
Use the Point buttons to select the desired Color temp.
7 8
level (XLow, Low, Mid, or High).
White balance (Red)
Press the Point 7 button to lighten the red tone; press the
Point 8 button to deepen the red tone (from 0 to 63).
White balance (Green)
Press the Point button to lighten the green tone; press
7
the Point button to deepen the green tone (from 0 to 63).
8
White balance (Blue)
Press the Point button to lighten the blue tone; press the
7
Point 8 button to deepen the blue tone (from 0 to 63).
✔Note:
•The Tint cannot be selected when the video system is
PAL, SECAM, PAL -M, or PAL-N.
•After adjusting the White balance Red, Green or Blue, the
Color temp. level will change to "Adj. " .
42
buttons to move the red
7 8
buttons to move the red frame
ed
buttons.
7 8
8 button to increase the intensity of
Image Adjust Menu
Image Adjust Menu icon
Move the red frame pointer
to the desired item and
then press the SELECT
button.
Selected Image level
Use the Point
to adjust the value.
buttons
7 8