Zoom Adjustment; Screen Position Adjustment; Focus Adjustment; Keystone Correction - Sanyo PJLINK PLC-XL51 Owner's Manual

Basic Operation

Zoom Adjustment

Press the ZOOM +/- buttons on the top control to adjust the
screen size. Screen size can be adjusted 84% to 100% from
its maximum screen size.
It is not available when On-Screen menu is displayed.
Zoom adjustment can be memorized. (p.45)

Screen Position Adjustment

Screen position can be adjusted in the Zoom Adjustment.
1
Press the ZOOM+ or ZOOM- buttons on the top
control.
2
While ZOOM+ or ZOOM- is displayed on the screen,
press the SELECT button. Arrow marks displayed on
the screen.
3
Press the point ed7 8 buttons to adjust screen
positions.
Screen position can not be adjusted at ZOOM maximum.

Focus Adjustment

Adjust the lens focus with the focus lever.

Keystone Correction

If a projected picture has keystone distortion, correct the
image with the Keystone function.
Press the KEYSTONE button on the top control or on the
remote control. The keystone dialog box appears. Correct
keystone distortion with the Point
adjustment can be stored (p.45).
Reduce the upper width
with the Point
e
24
buttons. Keystone
ed
Reduce the lower width
button. with the Point
Top Control
•The arrows are white when there is no correction.
•The direction of the arrow which are being corrected
turns red.
•The arrows disappear at the maximum correction.
•If you press the KEYSTONE button on the top control
or on the remote control once more while the
keystone dialog box is being displayed, the keystone
adjustment is canceled.
•The adjustable range can be limited depending on the
input signal.
•The projected picture may fluctuate momently
depending on the keystone adjustment.
•"Keystone" disappears after 4 seconds.
Top Control
Remote Control
button.
d
ZOOM +/- buttons
Focus Lever
KEySTONE
button
POINT ed buttons
KEySTONE button
POINT ed buttons