Sanyo PJLINK PLC-XL51 Owner's Manual page 53

Change the PIN code lock setting
Select Off, On1, or On2 with the Point
then move the red frame pointer to "Quit" with the Point
button. Press the SELECT button to close the dialog
d
box.
Change the PIN code
The PIN code can be changed to your desired four-digit
number.
Select "PIN code change" with the Point
press the SELECT button to display the New PIN code
input dialog box.
Select a number by pressing the Point
then press the Point button to fix the number and
8
move the pointer. Repeat it to complete entering a four-
digit number. After entering the four-digit number, move
the pointer to "Set" by pressing the Point
press the SELECT button.
CAUTION:
WHEN yOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE IN COLUMN OF THE
PIN CODE NO. MEMO ON PAGE 75, AND KEEP IT
SECURELy. IF yOU FORGET yOUR PIN CODE, THE
PROjECTOR CAN NO LONGER BE STARTED.
Alarm
This function allows you to configure the Alarm
operation. See "How to Use the Antitheft Alarm
Function" on pages 56-59.
Change the PIN code lock setting
buttons and
7 8
Change the PIN code
button, and
d
buttons. And
ed
button. Then
8
Select a desired setting with the
Point buttons.
7 8
Select PIN code change and
press the SELECT button.
The New PIN code input
dialog box appears.
The input numbers
are being displayed for
confirmation.
Setting
53 53