Image Level Adjustment - Sanyo PJLINK PLC-XL51 Owner's Manual

Computer Input

Image Level Adjustment

1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Image Adjust Menu icon.
2
Use the Point
pointer to the desired item, and then press the
SELECT button. The level of each item is displayed.
Use the Point
Contrast
Press the Point 7 button to decrease the contrast; press the
Point 8 button to increase the contrast (from 0 to 63).
Brightness
Press the Point button to decrease the brightness; press
7
the Point button to increase the brightness (from 0 to 63).
8
Color temp.
Use the Point buttons to select the desired Color temp.
7 8
level (XLow, Low, Mid, or High).
White balance (Red)
Press the Point 7 button to lighten the red tone; press the
Point button to deepen the red tone (from 0 to 63).
8
White balance (Green)
Press the Point button to lighten the green tone; press
7
the Point button to deepen the green tone (from 0 to 63).
8
White balance (Blue)
Press the Point 7 button to lighten the blue tone; press the
Point 8 button to deepen the blue tone (from 0 to 63).
Sharpness
Press the Point 7 button to decrease the sharpness of the
image; press the Point
of the image (from 0 to 15).
Gamma
Use the Point buttons to adjust the gamma value to get
7 8
better balance of contrast (from 0 to 15).
Reset
To reset the adjusted data, select "Reset" and press the
SELECT button. A confirmation box appears and then select
"Yes. " All adjustments return to their previous figures.
34
buttons to move the red
7 8
buttons to move the red frame
ed
buttons to adjust each level.
7 8
8 button to increase the sharpness
Image Adjust Menu
Image Adjust Menu icon
Move the red frame pointer
to the desired item and then
press the SELECT button.
Selected Image level
Use the Point
adjust the value.
✔Note:
•After adjusting the White balance Red,
Green, or Blue, the Color temp. level will
change to "Adj. " .
7 8 buttons to