Connecting The Projector; Terminal Of The Projector - Sanyo PLC - 12BL Owner's Manual

CONNECTING THE PROJECTOR

SIDE OF THE PROJECTOR (CONNECT THE COMPUTER)
9
10
11
R/C JACK
1
COMPUTER INPUT-1 TERMINAL (ANALOG HDB 15-PIN)
Used to connect a computer to the projector.
2
COMPUTER INPUT-1 TERMINAL (DIGITAL MDR 20-PIN)
Used to connect a computer to the projector.
3 COMPUTER INPUT-2 JACKS (BNC TYPE x 5)
Used to connect a computer to the projector.
4 MONITOR OUTPUT TERMINAL (ANALOG HDB 15-PIN)
Used to connect a monitor to the projector.
5 COMPUTER AUDIO INPUT-1 JACKS (R and L)
Used to connect an audio output from the computer to the
projector.
6
COMPUTER AUDIO INPUT-2 JACKS (R and L)
Used to connect an audio output from the computer to the
projector.
7
AUDIO MONITOR OUTPUT JACKS (R and L)
Used to connect an audio input from audio equipment to the
projector.

TERMINAL OF THE PROJECTOR

8 6
USB 1 CONTROL PORT 1 AUDIO 1
R L
USB 2 CONTROL PORT 2 AUDIO 2
R L
AUDIO OUT
SERIAL PORT
R L
13
7
12
1
5
ANALOG
(MONO)
R G B
(MONO)
ANALOG RGB
8
CONTROL PORT-1 CONNECTOR
Used to connect a mouse cable to the projector.
9
CONTROL PORT-2 CONNECTOR
Used to connect a mouse cable to the projector.
10
USB PORT-1 CONNECTOR
Used to connect a computer to the projector.
11
USB PORT-2 CONNECTOR
Used to connect a computer to the projector.
12 SERIAL PORT TERMINAL (DB9)
Used to connect a computer to the projector.
13
WIRED REMOTE JACK
When using the wired remote control, connect the
remote cable to this jack.
2
DIGITAL
3
H V
4
11