Operation Of The Remote Control; Wireless Remote Control Unit - Sanyo PLC - 12BL Owner's Manual

OPERATION OF THE REMOTE CONTROL

This remote control unit is not only able to operate the projector but also usable
as a wireless mouse for a PC. One pointing pad and two click buttons are used
for wireless mouse operation.
Wireless mouse is usable when PC mouse pointer is displayed on the screen.
When the menu or indicator of the projector is displayed on the screen instead
of the PC mouse pointer, the wireless mouse cannot be used.
NOTE: To use the unit as a PC wireless mouse, connect the projector to the
PC with the attached cable. Signals from the projector are transmitted
to the PC, enabling the remote control unit of the projector to be used
as a PC wireless mouse. (Refer to "CONNECTING THE PROJECTOR"
in pages 15 to 20 for the connection.)
LASER POINTER button
This remote control emits a laser beam light as the Laser
Pointer from the Laser Light Window.
When the LASER POINTER button is pressed, laser light goes
on: when the button is released, light goes off.
Laser light is emitted with the RED light indicating that the
laser beam is being emitted.
The laser emitted is a class
the laser light window or shine the laser beam on yourself or
other people. The three marks to the right are the caution
labels for the laser beam.
CAUTION-use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
FRONT
1
4
9
12
13
16
LASER POINTER
button

WIRELESS REMOTE CONTROL UNIT

laser; therefore, do not look into
5 7
2
3
6
8
11
14
10
15
18
17
BEFORE OPERATION
LASER LIGHT WINDOW
SIDE
19
25