Normal Function; Picture Screen Adjustment - Sanyo PLC - 12BL Owner's Manual

The normal picture level is preset on this projector at the
factory and can be restored anytime you press the NORMAL
button (located on the Top Control or on the Remote Control
Unit). The "Normal" display will be displayed on the screen for
a few seconds.

PICTURE SCREEN ADJUSTMENT

This projector has a picture screen resize function, which enables you to display the desirable image size.
Press the MENU button and the ON-SCREEN MENU will
1
appear. Press the POINT LEFT/RIGHT buttons to select
SCREEN and press the SELECT (REAR CLICK) button.
Another dialog box PICTURE SCREEN ADJUSTMENT
DISPLAY will appear.
Press the POINT DOWN button and a red-arrow icon will
2
appear. Move the arrow to the screen size that you want to set,
and then press the SELECT (REAR CLICK) button.
Regular
Normal Video Image size with 4 x 3 aspect ratio.
Wide
Resizes the image for wide screen size with 16 x 9 aspect ratio.

NORMAL FUNCTION

Normal
Move the pointer to the function and
press the SELECT (REAR CLICK)
button.
VIDEO MODE
47