Connecting The Projector; Terminals Of The Projector - Sanyo PLC-XU20E Owner's Manual

CONNECTING THE PROJECTOR

S-VIDEO INPUT JACK
Connect the S-VIDEO output
from the video equipment to this
terminal.
(Refer to P11.)
AUDIO INPUT JACKS
Connect the audio outputs from
the video equipment to these
terminals.
(Refer to P11.)
When the audio output is
monaural, connect it to the Left
jack.
COMPUTER INPUT TERMINAL
Connect the computer output to
this terminal.
(Refer to P12, 13.)
MONITOR OUTPUT TERMINAL
This terminal outputs the signal
from the COMPUTER
terminal. Connect to the monitor
to this terminal.
(Refer to P12, 13.)
COMPUTER INPUT / MONITOR OUTPUT TERMINAL
Terminal : HDB15-PIN
Connect the display output terminal of the computer to COMPUTER INPUT terminal of thus projector with the VGA Cable
(supplied). And connect to the monitor to MONITOR OUTPUT with the monitor cable (not supplied). When connecting
the Macintosh computer, the MAC Adapter (not supplied) is required.
Pin Configuration
CONTROL PORT CONNECTOR
Terminal : Mini DIN 8-PIN
Connect control port (PS/2, Serial or ADB port) on your computer to this terminal with the Control Cable (the Control
Cable for PS/2 port is supplied).
Pin Configuration
10

TERMINALS OF THE PROJECTOR

R-AUDIO-L
IN
5 4 3 2 1
10 9 8 7 6
15
14 13 12 11
8 7 6
5 4 3
2 1
S-VIDEO
AUDIO
VIDEO
(MONO)
IN
OUT
COMPUTER IN
MONITOR OUT
CONTROL PORT
1 Red Input 9
2 Green Input 10 Ground (Vert.sync.)
3 Blue Input 11
4 Sense 2 12
5 Ground (Horiz.sync.) 13
6 Ground (Red) 14
7 Ground (Green) 15
8 Ground (Blue)
PS/2 Serial ADB
1 ----- R X D -----
2 CLK ----- ADB
3 DATA ----- -----
4 GND GND GND
5 ----- RTS -----
6 ----- T X D -----
7 GND GND -----
8 ----- GND GND
VIDEO INPUT JACK
Connect the video output from
the video equipment to this
terminal.
(Refer to P11.)
COMPUTER AUDIO INPUT JACK
Connect the audio output from
the computer to this terminal.
(Refer to P12, 13.)
AUDIO OUTPUT JACK (STEREO)
Connect the audio amplifier to
this terminal.
(Refer to P11, 12, 13.)
CONTROL PORT CONNECTOR
When controlling the computer
with the Remote Control of this
projector, connect the mouse
port of your personal computer
to this terminal.
(Refer to P12, 13.)
Non Connect
Sense 0
Sense 1
Horiz. sync.
Vert. sync.
Reserved