Preparation; Name Of Each Part Of Projector - Sanyo PLV-HD2000E Owner's Manual

PREPARATION

NAME OF EACH PART OF PROJECTOR

FRONT OF CABINET
INFRARED
REMOTE RECEIVER
PROJECTION LENS
LENS CAP
CAUTION
Do not turn on a projector with lens cap attached.
High temperature from light beam may damage
lens cap and result in fire hazard.
BACK OF CABINET
EXHAUST VENT
HOT AIR EXHAUSTED !
Air blown from exhaust vent is hot. When
using or installing a projector, following
precautions should be taken.
G Do not put a flammable object near this vent.
G Keep rear grills at least 3.3' (1m) away from
any object, especially heat-sensitive object.
G Do not touch this area, especially screws
and metallic parts. This area will become
hot while a projector is used.
This projector detects internal temperature
and automatically controls operating power
of Cooling Fans.
BOTTOM OF CABINET
AIR INTAKE VENTS
This projector is equipped with cooling
fans for protection from overheating.
Pay attention to following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
G Do not cover vent slots.
G Keep bottom clear of any objects.
Obstructions may block cooling air.
CARRYING HANDLE
LEVEL AND TILT ADJUST HANDLE
INFRARED
REMOTE RECEIVER
AIR FILTER
ADJUSTABLE FEET
POWER CORD
CONNECTOR
MAIN ON / OFF
SWITCH
LAMP COVER
ADJUSTABLE FEET
7