Sanyo PLV-HD2000E Owner's Manual page 32

DISPLAY ADJUST
Current mode
Press SELECT button to show information of computer selected.
Clamp
Adjusts clamp position. When image has a dark bar(s), try this
adjustment.
3
Store
To store adjustment parameters, move a red frame pointer to
Store icon and then press SELECT button. Move a red arrow
pointer to any of Mode 1 to 20 that you want to store and then
press SELECT button.
Mode free
To clear adjustment parameters previously set, move a red
frame pointer to Mode free icon and then SELECT button. Move
a red arrow pointer to Mode that you want to clear and then
press SELECT button.
Other icons operates as follows.
Reset
Reset all adjust parameters on adjustment dialog box to previous
figure.
Quit
Closes DISPLAY ADJUST MENU.
32
Press SELECT button at this icon
to display previous items.
Press SELECT button at Current
mode icon to show information of
computer connected.
To store adjustment data.
Shows values of "Total dots"
Terminal board and
"Display area H" and "Display
System of input signal.
area V".
Vacant Mode
Store icon
Press POINT LEFT/RIGHT
buttons to display left/right page.
To clear adjustment data.
Shows values of scale and position
of "Aspect H" and "Aspect V" .
This Mode has parameters
being stored.
Press POINT UP/DOWN buttons
to display next/previous page.
Mode free icon
Current mode
Close this
dialog box.