Select Video System - Sanyo PLV-HD2000E Owner's Manual

BASIC OPERATION
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
SYSTEM SELECT Menu icon.
2 Press POINT DOWN button to move a red arrow pointer to
system that you want to select and then press SELECT button.
Projector automatically detects incoming SDI signal {(480i, 575i, 480p,
575p, 720p, 1035i, 1080i/60, 1080i/50, 1080p/60, 1080p/50, 1080p/30,
1080p/25, 1080p/24, 1080psf/30, 1080psf/25, 1080psf/24, 1080p/24
(2K) and 1080psf/24 (2K)}, and adjusts itself to optimize its
performance.
When System is 1080i/60, 1080psf/30, 1080i/50, 1080psf/25 select
system manually first.
Component video (YCbCr) Input
Auto
Projector automatically detects incoming Video signal, and adjusts
itself to optimize its performance.
When Video System is 1035i, 1080i/50 or 1080i/60, select system
manually first.
COMPONENT VIDEO SIGNAL FORMAT
If projector cannot reproduce proper video image, it is necessary to
select a specific component video signal format among 480i, 575i,
480p, 575p, 720p, 1035i , 1080i/50 or 1080i/60.
28

SELECT VIDEO SYSTEM

SDI Input
SYSTEM SELECT MENU (SDI)
SYSTEM SELECT Menu icon
Displays system being selected.
Systems on this dialog box can
be selected.
SYSTEM SELECT MENU (Component video)
SYSTEM SELECT Menu icon
Displays system being selected.
Systems on this dialog box can
be selected.
Custom Mode (1~15) set in
DISPLAY ADJUST Menu.
(P31, 32)