Sanyo PLV-HD2000E Owner's Manual page 26

BASIC OPERATION
WHEN SELECT INPUT 2 (5 BNC TERMINAL)
Move a pointer to source that you want to select and press SELECT
button.
RGB
When connect a computer output [5 BNC Type (Red, Green, Blue,
Horiz. Sync and Vert. Sync.)] from a computer to R/Pr, G/Y, B/Pb,
H/HV and V jacks.
YCbCr
When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from
video equipment to R/Pr, G/Y and B/Pb jacks.
WHEN SELECT INPUT 3 (DVI TERMINAL)
Move a pointer to source that you want to select and press SELECT
button.
RGB(Analog)
When your computer is connected to INPUT 3 (ANALOG) terminal,
select RGB(Analog).
RGB(Scart)
When video equipment is connected to INPUT 3 (ANALOG) terminal,
select RGB(Scart).
RGB(PC digital)
When your computer is connected to INPUT 3 (DIGITAL) terminal,
select RGB(PC digital).
RGB(AV HDCP)
If a HDCP-compatible signal source is connected to the INPUT 3
(DIGITAL) terminal, select RGB(AV HDCP).
26
INPUT MENU
INPUT Menu icon
Move arrow to INPUT source
that you want to select, and
then press SELECT button.
Input 2
NOTE;
HDCP (High-bandwidth Digital Content
Protection) is a system for protecting digital
entertainment content which is delivered by DVI
(Digital Visual Interface) from being copied.
The specification of HDCP is decided and
controlled by Digital Content Protection, LLC.
Should the specification be changed, this
projector may not display the digital content
protected by HDCP.
Input 3