Sanyo PLV-HD2000E Owner's Manual page 57

Sanyo multimedia projector owner's manual

Hide thumbs Also See for PLV-HD2000E:

Table of Contents

LENS REPLACEMENT AND INSTALLATION PROCEDURE

NOTE : The installation procedure and needed parts

for lens installation depend on the type of the

Projection Lens. Check the Model No. of the

Projection Lens and be sure to install or replace the

lens following procedure below.

Remove Lens Cover. Remove 2 Screws A. Push

part B and pull Upper Lens Cover up.

(See Fig. 1.)

Remove 4 Screws C. Pull Lower Lens Cover

toward front and remove. (See Fig. 2.)

Remove 2 Screws D and Cover Plate on the

back of Upper Lens Cover. (See Fig. 3.)

UPPER LENS

COVER

LOWER LENS

COVER

COVER PLATE

- 2 -

Fig-1

Fig-2

UPPER LENS

COVER

Fig-3

Table of Contents