Setting; Setting Menu - Sanyo PLV-HD2000E Owner's Manual

SETTING

1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button(s) to move a red-frame pointer to
SETTING icon.
2
Press POINT DOWN button to move a red-frame pointer to item
that you want to set and then press SELECT button. Setting
dialog box appears.
Language
Language used in ON-SCREEN MENU is selectable from among
English, German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Russian, Chinese, Korean and Japanese.
Lamp Mode
This Projector is equipped with 4 Projection Lamps and a number of
using lamps can be switched to 4 lamps or 2 lamps. Using 2 lamps
maintain life of Projection Lamps.
To change over Lamp Mode
1. Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to select SETTING and press
SELECT button. Setting dialog box appears.
2. Press POINT DOWN button to move a red frame pointer to
"Lamp mode". Set "4 lamps mode" or "2 lamps mode" by
pressing POINT LEFT/RIGHT button(s). When Lamp Mode is
set from "4 lamps mode" to "2 lamps mode" image becomes little
darker. When Lamp Mode is set from "2 lamps mode" to "4
lamps mode" image become brighter gradually.
NOTE: After changing Lamp Mode, it cannot be switched again for
90 seconds.
Blue back
When this function is "On," this projector will produce a blue image
instead of the video noise on the screen when any input source is
unplugged or turned off.
Display
This function decides whether to display On-Screen Displays.
On ··· Shows all the On-Screen Displays.
Off ··· Sets On-Screen Displays disappeared except;
G ON-SCREEN MENU
G "Power off?" message
G "No signal" message
G "Please wait" message
Menu size
This function decides to display On-Screen Displays size.
Normal ··· Shows normal size the On-Screen Displays.
Double ··· Shows double size the On-Screen Displays.
38

SETTING MENU

SETTING MENU
Set a red frame
pointer to item and
press SELECT
button.
When pressing SELECT
button at Language,
Language Menu appears.
08
Move a pointer to item
Optional Control Number
and then press POINT
Refer to page 12.
LEFT/RIGHT button(s).
SETTING Menu icon