Sanyo PLV-HD2000E Owner's Manual page 13

INPUT/OUTPUT TERMINALS AND JACKS
INPUT 1
DUAL LINK SDI INPUT JACKS
Connect Dual link SDI output from
video equipment to these jacks.
(Refer to P16.)
SERIAL PORT IN
SERIAL PORT OUT
R/C JACK USB
AUDIO OUT
R L
RESET
(MONO)
INPUT 2
5 BNC INPUT JACKS
Connect component video output (Cr, Y,
Cb or Pr, Y, Pb) from video equipment to
R/Pr, G/Y and B/Pb jacks or connect
computer output [5 BNC Type (Red,
Green, Blue, Horiz. Sync and Vert.
Sync.)] from computer to R/Pr, G/Y,
B/Pb, H/HV and V jacks. (Refer to P15,
16)
INPUT 1
DUAL LINK SDI OUTPUT JACKS
Connect Dual link SDI input from video
equipment to this jack. (Refer to P16.)
LINK A OUT
IN
R/Pr G/Y B/Pb H/HV V
DVI
INPUT 3
DVI INPUT TERMINAL
Connect computer output
(Digital/Analog DVI-I type)
to this terminal.
Connect digital video output
from video equipment to this
terminal.
(Refer to P15, 16.)
CONNECTING PROJECTOR
INPUT 2, 3
AUDIO INPUT JACKS
Connect audio output
from computer or video
equipment to these jacks.
(Refer to P15, 16.)
IN LINK B OUT
AUDIO CONTROL PORT
R L
(MONO)
AUDIO CONTROL PORT
R L
(MONO)
INPUT 2, 3,
CONTROL PORT CONNECTORS
The port is not functioning in this model.
13