Terminal Block Unit UTBD1
UTBD1 specifications
Model name
Form of mounting
Number of modules that can be
mounted
Compatible modules
Compatible option board
Compatible short bar
External line terminal block
Matching external line size
External power supply
Maximum current in I/O bus
Accessories
Ability of insulation to withstand
voltage
External dimensions
Weight
Item
UTBD1
Exclusively for perpendicular mounting on DIN rail (fixed in place
with M4 screws)
1 (mounted on upper side)
SDI01, SDO01
Unnecessary
FSBR2 (for common wire connection)
2 removable type terminal blocks (M3.5 screws 21 terminals)
1.25 mm
24 Vdc 10%, ripple 5% or less (external load, for contact use)
24 Vdc-2.2 A (total PI/O modules current consumption)
1 I/O bus cable ZCS005A0701
1 blank cover FSVC1
1 short bar FSBR2
500 Vac for 1 minute (between external and internal signal lines)
80 W 240 H 77 D mm (the unit alone, excluding protrusions)
80 W 240 H 120 D mm (with PI/O module mounted, excluding
protrusions)
900 g or less (unit with short bar attached)
3. System Configuration Unit and Module
Specification
2
or less
53