Analog Input Module Sai01 - Toshiba TOSDIC-CIE DS Instruction Manual

3. System Configuration Unit and Module
Analog Input Module SAI01
SAI01 module specifications
Model name
Number of input points
Input insulation unit
Input signal level
Maximum applied voltage
Input impedance
Data update period
A/D conversion data
CMRR
Standard input accuracy
Temperature drift
Power supply voltage drift
Input wire break
characteristics
Input wire break detection
time
Address setting
Diagnosis of trouble
Insulation resistance
Ability of insulation to
withstand voltage
Current consumption
Internal heat generation
Compatible terminal block
units
Compatible I/O base unit
Compatible options
External dimensions
Weight
68
Item
SAI01
8 points
8 points isolated together (input(-) side common)
Bipolar:  10 mVdc,  20 mVdc,  50 mVdc,  100 mVdc,  1 Vdc,  5 Vdc
Unipolar: 1-5 Vdc
Each point set independently, mix of bipolar and unipolar not allowed.
 30 V peak
1 M  or more
Bipolar: 355/302 ms(50/60 Hz filter, either can be selected)
Unipolar: 40 ms
Bipolar: -32000 to +32000 counts
Unipolar: +6400 to +32000 counts
100 dB or more (100 Vac-50/60 Hz)
Within  0.1% of full scale
Within  0.015%/  C
Within  0.1% of full scale (in a system power supply fluctuation of  10%)
Down scale
2 seconds (bipolar), 10 seconds (unipolar)
Set from 1 to E (decimal 1 to 14) by front panel address setting switch.
Analog standard voltage, transmission, CPU, memory
100 M  or more (measured with 500 Vdc megger, between total inputs
and internal circuits)
500 Vac for 1 minute (between total inputs and internal circuits)
24 Vdc-50 mA or less (system power supply)
1.2 W or less (rated condition)
UTBA1, UTBA3 (when SDA01 module is used)
UABU1
FIVC11, FIVC12, SDA01 (when UTBA3 is used)
40 W x 90 H x 95 D mm (excluding protrusions)
200 g or less
Specification