Advertisement
CLEANING
•
Clean the tester with a clean, soft cloth.
•
Do not use any chemicals, abrasives or solvents that could damage the tester.
BATTERY REPLACEMENT
• Disconnect any leads from the meter before opening the battery cover.
• Insert a flat blade in the slot at the base of the battery tray and lift it slightly to
disengage the latch then pull the tray out.
• Replace with a new 9V battery making sure the polarity matches the markings
inside the tray, then slide the tray fully home and press it down to engage the latch.
SPECIFICATIONS
Power supply
Dimensions HxWxD
Weight
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT
These symbols indicate that separate collection of Waste Electrical and Electronic Equipment
(WEEE) or waste batteries is required. Do not dispose of these items with general household
waste. Separate for the treatment, recovery and recycling of the materials used. Waste batteries
can be returned to any waste battery recycling point which are provided by most battery retailers.
Contact your local authority for details of the battery and WEEE recycling schemes available in
your area.
DC 9V NEDA1604 / 6F22 / PP9 battery or equivalent
alkaline or heavy duty
190 x 115 x 55mm
Approx 840g (inc battery)
4
Made in China.
PO Box 13362 Dublin 2
PR2 9PP
Man Rev 1.1
Advertisement
