Sanus Systems Motorized Mount LA112 Installation Manual page 2

Supplied Parts and Hardware
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item
to your dealer; contact Sanus Systems Customer Service. Never use damaged parts!
This product contains small items that could be a choking hazard if swallowed. Keep these items away from
young children!
Adapters are not included with the LA112. If you need an adapter, contact Sanus Systems Customer Service at
OPT
1-800-359-5520 or email us at info@sanus.com. You may also visit our website: www.sanus.com
OPT
Determine if your monitor will require adapters to fit the LA112. Measure the distance between the mounting holes on the
back of the monitor.
For monitors with hole patterns less than 21.5 inches (54.6 cm) wide, install Cross Plate adapters.
For monitors with hole patterns 26 - 34.5 inches (66 - 87.6 cm) wide, install Bar Extension
adapters.
3/8
1/8 in.
WaRNING
Measure width
between holes
1/2 in.
For monitors 18.5 - 27.5 inches
(47 - 70 cm) high, install
Bracket Extension adapters.
Measure height
between holes
6901-100189 <01>